Used f250

F-250 and Super Duty Trucks

2016.12.14 03:01 IRLImADuck F-250 and Super Duty Trucks

All about the F-250, F-350, and F-450
[link]

2011.08.03 08:51 Chalmun Ford Trucks

A community for everything about Ford trucks and vans.
[link]

2009.02.07 16:07 /r/Trucks

Trucks. Utility, offroad, function, or even laying frame. This is the central hub for truck discussion.
[link]

2023.06.06 19:29 Ligmaaballz New bike vs second hand , help me decide

Hi everyone, I was planning to go for a bike 200cc around and it's my first bike , main use is to ride in city and occasional touring , one thought was to go for a new one which would cost me around 1.75 - 1.80 lakh and another thought was to go for second hand 2-3 year old version of the same which would cost me 1 lakh or less ,and save 70-80k of mine , bike that I'm considering is tvs Apache RTR 200 / NS200 pulsar / pulsar F250 ( rtr is first preference)
Give me your suggestions plz :)
submitted by Ligmaaballz to punebikers [link] [comments]

2023.06.06 18:47 Ligmaaballz New bike or second hand , help me decide

Hi everyone, I was planning to go for a bike 200cc around and it's my first bike , main use is to ride in city and occasional touring , one thought was to go for a new one which would cost me around 1.75 - 1.80 lakh and another thought was to go for second hand 2-3 year old version of the same which would cost me 1 lakh or less ,and save 70-80k of mine , bike that I'm considering is tvs Apache RTR 200 / NS200 pulsar / pulsar F250 ( rtr is first preference)
Give me your suggestions plz :)
submitted by Ligmaaballz to indianbikes [link] [comments]

2023.06.06 18:43 Ligmaaballz Second hand bike vs new , help me decide

Hi everyone, I was planning to go for a bike 200cc around, main use is to ride in city and occasional touring , one thought was to go for a new one which would cost me around 1.75 - 1.80 lakh and another thought was to go for second hand 2-3 year old version of the same which would cost me 1 lakh or less ,and save 70-80k of mine , bike that I'm considering is tvs Apache RTR 200 / NS200 pulsar / pulsar F250 ( rtr is first preference)
Give me your suggestions plz :)
submitted by Ligmaaballz to pune [link] [comments]

2023.06.05 12:24 Evil_Token someone explain

someone explain submitted by Evil_Token to bloxfruits [link] [comments]

2023.06.05 00:39 JimmyTheBuilder Sync not working?

Hi all,
I recently purchased a used 2016 f250 xlt, and I can't get the sync / bluetooth to work. When I click the voice or phone buttons, nothing happens. The radio works fine though. Has anyone experienced this?
It randomly worked 1 time, so I know it can work.
Edit: its not a touch screen l
submitted by JimmyTheBuilder to F250 [link] [comments]

2023.06.03 23:47 GrandPawWood Tank selector valve feedback

Tank selector valve feedback
New Tank selector valve. This is on a 1975 F250 360FE Automatic 2wd with the dual tanks. Previous owner had bypassed the electric selector valve and put in a manual one. The manual valve was leaking so I removed it and went straight to the main tank. Everything was fine running one gas tank since most trips are less than 100 miles. However, I'd like to take it on a road trip so I'd like to use the auxiliary gas tank. I installed a new tank selector valve from LMC Truck, so far so good.
Now the problem I'm having is that the auxiliary tank is empty but when I start the truck and then switch to the auxiliary tank, I see gas in the filter I put in and the truck runs for a couple of minutes before it dies. I was expecting it to die a few seconds after switching to the auxiliary tank but it keeps running for a couple of minutes. I also didn't expect to see fuel in the filter coming from the empty auxiliary gas tank (I actually think its gas from the main tank or the line that runs to the fuel pump somehow getting past the valve).
Other than that, it appears to be working. Is this normal or am i missing something?
submitted by GrandPawWood to Dentside_fords [link] [comments]

2023.06.02 19:49 smallblockmotor_9274 Are these two trucks worth buying for $1,800? '69 F100 and '76 F250? Are they actually worth $1,800 for the two together?

Are these two trucks worth buying for $1,800? '69 F100 and '76 F250? Are they actually worth $1,800 for the two together?
I have seen these trucks in person but did not take more photos. Green 76' F250 is 2WD has a good 360 in the bed and a C6 in the truck, and has perfect straight body panels and the interior is alright. Parts are good but floors are rotten and bench is not to bad. Maroon 1969 F100 in 2nd photo has a rebuilt 390 on a stand, and an automatic transmission in the truck. The interior parts are good but floors are completely toast because of the carpet floor and the bench seat is in the bed under a tarp, just needs some foam it's not to ruined surprisingly. There is some cab corner rot but NO rot above door rails! There is also rot above the trim along the bed. I do have a perfect 67-72 cab with good floors I could use for that. He came down from $2,000 to $1,800. He says he paid $1,200 for the 76' and has over $2k in the 69' but I've asked but he spent that 2k on and he didn't say. I've seen these in person, that 69' has no new parts so that money would have to be in the rebuilt 390. Are these worth the buy for $1,800? I'm not asking should I buy them, I'm asking if they are worth buying for $1,800. I feel like I'm being robbed here $1,800 for a bunch of old junk but I do want them.
submitted by smallblockmotor_9274 to Dentside_fords [link] [comments]

2023.06.02 19:33 smallblockmotor_9274 Are these two trucks worth buying for $1,800? '69 F100 and '76 F250? Are they actually worth $1,800 for the two together?

Are these two trucks worth buying for $1,800? '69 F100 and '76 F250? Are they actually worth $1,800 for the two together?
I have seen these trucks in person but did not take more photos. Green 76' F250 is 2WD has a good 360 in the bed and a C6 in the truck, and has perfect straight body panels and the interior is alright. Parts are good but floors are rotten and bench is not to bad. Maroon 1969 F100 in 2nd photo has a rebuilt 390 on a stand, and an automatic transmission in the truck. The interior parts are good but floors are completely toast because of the carpet floor and the bench seat is in the bed under a tarp, just needs some foam it's not to ruined surprisingly. There is some cab corner rot but NO rot above door rails! There is also rot above the trim along the bed. I do have a perfect 67-72 cab with good floors I could use for that. He came down from $2,000 to $1,800. He says he paid $1,200 for the 76' and has over $2k in the 69' but I've asked but he spent that 2k on and he didn't say. I've seen these in person, that 69' has no new parts so that money would have to be in the rebuilt 390. Are these worth the buy for $1,800? I'm not asking should I buy them, I'm asking if they are worth buying for $1,800. I feel like I'm being robbed here $1,800 for a bunch of old junk but I do want them.
submitted by smallblockmotor_9274 to BumpSide [link] [comments]

2023.06.01 17:27 cmcolfax Phone Mounts?

2015 F250 Lariat
Whatchugot and why?
I actually use the center dashboard compartment.
I actually use the center console cupholders.
I don't love windshield suction cup mounts.
And I actually use my phone for GPS etc while driving.
And I prefer it towards the center of my field of view.
submitted by cmcolfax to superduty [link] [comments]

2023.06.01 13:19 K3406 Towing questions

Does a F250 use less fuel while towing a trailer and mini excavator than an F150?
It may seem like a stupid question but I’m genuinely curious, I have put many factors into consideration but I’m still stuck on the question. Thank you for your replies!
Edit: I forgot to mention, the trucks will be used, not new. F150, 2010-2014 models. F250, 2010-2013 models.
Thank you!
submitted by K3406 to MechanicAdvice [link] [comments]

2023.05.31 21:10 Mwebe96 Amp recommendations?

Looking for some help on figuring out what power amps to use?
Putting a set up in my 08 F250 with JBL862CF speakers in the front, JBL 8621F speakers in the rear, and JL10TW3-D4 subs. I know I probably need to two amps, one for the sub and another for the component speakers. What power amps should I use for those, what number of channels for the component speakers, and any brand recommendations?
submitted by Mwebe96 to CarAV [link] [comments]

2023.05.30 19:25 VisibleMotor3070 Should I buy these two trucks for $1,800? The 69' and green 76'?

Should I buy these two trucks for $1,800? The 69' and green 76'?
I have seen these trucke in person but did not take more photos. Green 76' F250 is 2WD has a good 360 in the bed and a C6 in the truck, and has perfect straight body panels and the interior is alright. Parts are good but floors are rotten and bench is not to bad. Maroon 1969 F100 in 2nd photo has a rebuilt 390 on a stand, and an automatic transmission in the truck. The interior parts are good but floors are completely toast because of the carpet floor and the bench seat is in the bed under a tarp, just needs some foam it's not to ruined surprisingly. There is some cab corner rot but NO rot above door rails! There is also rot above the trim along the bed. I do have a perfect 67-72 cab with good floors I could use for that. He came down from $2,000 to $1,800. He says he paid $1,200 for the 76' and has over $2k in the 69' but I've asked but he spent that 2k on and he didn't say. I've seen these in person, that 69' has no new parts so that money would have to be in the rebuilt 390. Are these worth the buy for $1,800?
submitted by VisibleMotor3070 to BumpSide [link] [comments]

2023.05.30 18:55 freshgiraffe1 How can I solve this Package project error?

How can I solve this Package project error?
How can i slove this Package project error?
I don’t know what kind of promblem it isplz help me
https://preview.redd.it/h9upl9z2j13b1.png?width=3780&format=png&auto=webp&s=3ad14bc19888f8d5642f048ea8f1c7edb51a0b75
submitted by freshgiraffe1 to unrealengine [link] [comments]

2023.05.30 18:02 VisibleMotor3070 Should I buy these two trucks for $1,800? The 76' and 69'?

Should I buy these two trucks for $1,800? The 76' and 69'?
I have seen these trucke in person but did not take more photos. Green 76' F250 is 2WD has a good 360 in the bed and a C6 in the truck, and has perfect straight body panels and the interior is alright. Parts are good but floors are rotten and bench is not to bad. Maroon 1969 F100 in 2nd photo has a rebuilt 390 on a stand, and an automatic transmission in the truck. The interior parts are good but floors are completely toast because of the carpet floor and the bench seat is in the bed under a tarp, just needs some foam it's not to ruined surprisingly. There is some cab corner rot but NO rot above door rails! There is also rot above the trim along the bed. I do have a perfect 67-72 cab with good floors I could use for that. He came down from $2,000 to $1,800. He says he paid $1,200 for the 76' and has over $2k in the 69' but I've asked but he spent that 2k on and he didn't say. I've seen these in person, that 69' has no new parts so that money would have to be in the rebuilt 390. Are these worth the buy for $1,800?
submitted by VisibleMotor3070 to Dentside_fords [link] [comments]

2023.05.30 00:40 gravelGoddess Mobile mechanic for Ford F250 diesel truck

Problem:
2008 Ford F250 diesel.
Truck will start then stops without turning off ignition. Sometimes, it will start again and other times it won’t. New battery on driver‘s side which is what is needed to start truck. Other battery is older but still keeps charge. Check engine light is staying on but disappears when it is running.
Husband uses NOCO Boost X GBX75 to jump start. It has to be fully charged for truck to start.
Can someone recommend a mobile mechanic for us?
submitted by gravelGoddess to Bellingham [link] [comments]

2023.05.29 20:38 letr1 What would you recommend for a truck that can be used in a year for 5th wheel

Hello,
we are looking for a truck under 8 000 Canadian Dollars, it has to be capable of towing 24ft 5th wheel that we will buy next year. This year we just want to use the truck as our camper :)
Iv been looking at 2001 silverados, 2006 ram 2500, and some f250 but all of them are known for transmission issues when they have around 200 000km on it. And all of these trucks are 200k-280k km
We are also looking for gas as diesel is just too expensive to maintain. We will be on the road till the end of the season and then work through winter to get the 5th wheel.
What should i look out for?
Thank you
submitted by letr1 to TruckCampers [link] [comments]

2023.05.29 16:33 C0tt0nm0uffxx Another 4X4 Question

I was reading the other thread about driving 4X4 on dry pavement and It sounded a lot like something I have going on with my 2001 F250 Super Duty 4X4. It’s the 5.4 SOHC gasser if that makes any difference. It’s part time 4X4 with locking front hubs.
I drove it off-road this past deer season and it did fine but I noticed it just kind of felt like it was binding when I made turns. It didn’t make sounds or anything but it just felt stiff. I just chalked it up to it being normal as I have driven several other 4X4’s that had that same stiff feeling to them. Especially the older models.
Then we had a large snow storm and I used 4X4 to get to the store which is about 7 miles away. I had to take the highway as I live in a rural area and secondary roads do not get plowed. I kept it under 50 MPH.
I made two trips to the store that week and the second time I forgot to take it out of 4 hi before I got out on the highway (pavement was dry). I also forgot to keep it under 50 and probably got it up to 70 MPH for maybe 4-5 miles.
When I got in the parking lot of the store it started binding up when I turned, especially while making tight left hand turns in the parking lot. I then remembered that I had forgotten to take it out of 4 hi. I immediately unlocked the hubs and took it out of 4 hi and the noise went away.
I am going to have to have this fixed before next hunting season and was just wondering how screwed I am? As far as I can tell the noise seems to be coming from the left front wheel or so it seems and it hasn’t made any noise since I took it out of 4X4. What kind of damages could I be looking at and is it something I could possibly fix myself? I have been working on cars and trucks since I was a kid. I can do simple things, change coil pack, starter, water pump, things of that nature. I only have a basic mechanics set of sockets and basic hand tools, floor jack. Where should I begin to diagnose a problem? I do have a diagnostic scanner (Blue-driver) and I have 0 pending or confirmed system codes.
submitted by C0tt0nm0uffxx to AskMechanics [link] [comments]

2023.05.29 02:22 dragonagitator Bellingham-Area Mechanics Master Post

Since it seems that no one can be bothered to search the sub for the word "mechanic" before making a new post, I searched it for you and summarized two years' worth of posts below.
TL;DR the recommendation is almost always "Rising Sun Motors" unless you've got an unusual vehicle or situation. Also, apparently XSrcing has spent the past couple years quietly helping poor people fix their cars for free/cheap, so everyone be sure to buy that guy a beer next time you see him.
2023-05-29 Mobile mechanic for Ford F250 diesel truck
2023-05-23 Body shops that work on 90s Hondas
2023-05-17 Where's my Subaru Mechanic?!
2023-05-15 Mechanic for an 89 Trooper
2023-05-10 Volvo Mechanic
2023-05-09 Subaru Mechanic
2023-05-04 Chuck's Midtown Motors?
2023-04-29 Anyone know of a good mechanic around here?
2023-04-19 Local mechanics
2023-04-19 Classic Car Mechanic
2023-04-17 Bellingham Automotive is SLIMEY and will steal from you. They tampered with my car then gave me a nasty attitude about it.
2023-04-08 Looking for a diesel mechanic for 97 e350 short bus
2023-03-23 Classic car mechanic
2023-03-17 Pro/Amateur mobile mechanic?
2023-02-27 A trustworthy mechanic?
2023-02-21 ISO mechanic for classic Chevy pickup
2023-02-15 good mechanics?
2023-02-15 mechanics that do free / cheap diagnosis in town ? (not talking check engine lights btw)
2023-02-03 Mechanic Recommendation
2023-02-02 Car Problems
2023-01-30 22re yota mechanic?
2023-01-12 Seeking mechanic recommendations for 10 year old ford work truck. Computer is dying and it needs a junkyard transplant.
2023-01-12 Transmission Mechanic?
2022-12-30 Mechanic recommendations?
2022-12-05 Are there ANY decent auto shops in this town?
2022-11-25 Jurachic Auto
2022-11-11 Suzuki mechanic near bham
2022-10-22 How do I find a good mechanic?
2022-09-27 Garage/Mechanic Recommendation to fit a tall (9-10ish ft) camper van?
2022-09-19 Best Affordable Mechanic in Bellingham
2022-09-15 Is there a car repair shop that takes payment plans in or around Bellingham?
2022-08-29 Mechanic/someone who can diagnose a transmission sound for free, trying to get to a wedding.
2022-08-16 Mechanic shops
2022-08-06 Honest affordable mechanic?
2022-08-02 Oil change for prius
2022-07-20 Any recommendations for a good mechanic to replace a catalytic converter?
2022-06-13 Respectful/honest mechanic?
2022-05-30 Old Chevy Truck 88' best mechanic.
2022-05-30 Trustworthy/not scammy mechanics in the area?
2022-05-19 Anyone have a recommendation on a good mechanic to replace brake pads on an older Subaru? Thanks!
2022-05-04 Looking for a good mechanic!
2022-04-09 Motorcycle mechanic
2022-02-09 Prius mechanic
2022-02-02 Mechanic recommendation
2022-02-02 Auto Repair
2022-02-02 Any mobile mechanics/someone to check out a car tomorrow?
2022-01-22 Mechanic Recommendation
2022-01-20 Need help checking out a used car
2022-01-16 Diverter for exhaust
2022-01-14 Mechanic Recommendations?
2022-01-02 Does anyone here know a mechanic that can come to my place? My car won’t start.
2021-12-21 Car broke down - need advice
2021-11-30 In desperate need of a mechanic
2021-11-28 Car Mechanic Open on Sunday
2021-11-17 Looking for mechanic for '83 Ford ranger
2021-11-12 Subie Mech
2021-11-05 Looking for a Volvo mechanic
2021-10-15 Recommendations for experienced Element mechanics?
2021-10-04 FIAT Mechanic?
2021-09-30 Toyota Service Mechanic
2021-09-19 Subaru owners of Bellingham!
2021-09-13 Seeking car repair recommendations
2021-09-10 Keith Cox Autobahn? Mechanic recommendation?
2021-08-31 Anywhere in town work on Lexus vehicles?
2021-08-11 Looking for Subaru mechanic
2021-07-09 Car maintenance
2021-06-01 Local mechanic shops
submitted by dragonagitator to Bellingham [link] [comments]

2023.05.28 18:38 SpotAnnual5978 how to detail my husband's truck

hello all, my husband and I recently got an '86 Ford F250 XL
He is wanting to get it ready for a car show later in the year, and I'd like to start the detailing to figure out the best way to keep his truck looking great. We bought it from a guy who barely used it, but it is in great condition.
I was hoping to get advice on the best exterior washes and waxes, as I feel I have the interior cleaned up well. Any advice is appreciated! I want to encourage his hobby and do something with him that he loves.
submitted by SpotAnnual5978 to classictrucks [link] [comments]

2023.05.28 05:59 rsmcarthur F250 Lariat 6.2L?

Hey guys, new here. Have the opportunity to purchase a 2019 F250 Lariat 6.2L gas job with 160.0 wb, dark grey - 72000km, single owner, miner most likely - they’re asking $70,000 - CARFAX checks out - everything on the exterior is good to go, very good condition. Bedlined. - interior is scuffed to hell on both front door arm rests, tear in side drivers seat, pretty heavy wear and tear, rear of console scratched heavily, most likely duffel bags thrown in and out. - Ford dealer selling as used. - New to Ford - This a good deal? Should I ask for replacement interior panels? - Possibly trade tor 2022 Explorer ST dark grey with 13,500km
Thanks in advance.
submitted by rsmcarthur to F250 [link] [comments]

2023.05.28 02:49 BobbyLove87 1997 Ford F250 Sputters

1997 Ford F250 5.8L Sputters
I have a 1997 Ford F250 5.8L with dual tanks. The rear tank works just fine. However, when I switch it to the front tank, it begins to kind of sputter and lose power the harder I press on the gas.
I assume since the rear tank works, it’s not a filter or injector problem. Is this typically a fuel pump or possible bad fuel problem?
(Just bought the truck, was used as an old farm truck)
submitted by BobbyLove87 to AskMechanics [link] [comments]

2023.05.28 00:10 iammufusasboy I just bought my first truck and my anxiety is getting the best of me, maybe…

Hey everyone, kinda new to this sub and new to owning a truck period. Just bought a single cab ‘16 F250 4X4 with about 110k on it. It’s purpose is to pull my camper and that’s basically it. Might see 3,000 miles a year, if that. I got it for a great price and that’s what has me worried. I think I did everything right, checked oil and tranny fluid for any grittiness. Started it cold and let run for a few minutes. Test drove in 2WD and 4WD(which I’ll probably never use). Inspected underneath for rust, frame damage, suspension and rear axle. Carfax report showed an oil change every 5k give or take and no issues expect a open recall for the clock spring. Dealership had 4.6, 4.7, and 4.8 out of 5 star ratings from 3 sites totaling 1500 reviews. All negative reviews seems to be personalities on both sides or people not understanding how much trucks cost.
So much for me to unpack here, but I’m scared and excited at the same time. I’ve towed before but now it’s MY truck. Towing a standard tow behind but might upgrade to a 5th wheel now that I’ve got a truck.
Since it may sit 80% of the time what should I watch out for? Tire dry rot I’m aware of, oil change due to mileage of course at 5k, but what about timeframe for these specially. I have some automotive background, so I can work on it myself with the help of YouTube, but believe me I know my limits(I like to think I’m not an idiot). Anything else I need to be concerned with?
Looking at other posts from this sub I’ve got the truck for me and my budget, but damn my nerves are at a 10 and it’s been 4 days since I bought it.
submitted by iammufusasboy to FordTrucks [link] [comments]